Size:0.3-3.0m

Weight:1.7-17.7Kg

Vertical standards sit on scaffolding jacks. Ledgers, transoms and diagonal braces connect to these standards. The spigot on top enables another standard to be put on top to reach target heights.

Comply to Australian Standard AS1576

Standard top (open end)          Hot dip Galvanize

Standard 0.5m, WT 4mm        Hot dip Galvanize

Standard 1.0m, WT 4mm         Hot dip Galvanize

Standard 1.5m, WT 4mm         Hot dip Galvanize

Standard 2.0m, WT 4mm        Hot dip Galvanize

Standard 2.5m, WT 4mm         Hot dip Galvanize

Standard 3.0m, WT 4mm         Hot dip Galvanize

​

Size:0.7m-3.0m

Weight:3.6--11.9Kg

Description:Ledger connects between two standards to give width to scaffold bay.

​

Ledger 0.7m, WT 3.2mm

Ledger 1.2m, WT 3.2mm

Ledger 1.8m, WT 3.2mm

Ledger 2.4m, WT 3.2mm

Size:0.5m-2.4m

Weight:4.2--27.1Kg

Description:Transoms connect between two standards to give depth to the scaffold bay. The depth of the bay determines how many steel planks can be laid down as a platform for working on.

​

Transom 0.5m, back to back 5mm

Transom 0.7m, back to back 5mm

Transom 1.2m, back to back 5mm

Transom 1.8m, back to back 5mm

Transom 2.4m, back to back 5mm

​

​

Size:0.7 and 1.2 m

Weight:5.6--7.9Kg

Description:Ladder access transoms enable aluminium ladders to be placed within a scaffold bay.

Size:1.8/2.4 m

Weight:18.5 / 49.5 kg

​

Preorder only

Size:1.7m-3.6m

Weight:7.0-14.3kg

Description:Diagonal braces connect two standards together in a single scaffold bay to provide strenth and stability to the bay.

​

Brace 1.7m

Brace 2.1m

Brace 2.7m

Brace 3.2m

Brace 3.6m

Brace 3.7m

Comply to Australian Standard AS1576

Size:width 280mm

Weight:2.3Kg

One board hopup is used when you wish to have a platform that steps out one plank width out from the scaffolding bay. 
Two hopups are connected to opposing standards in one scaffolding bay, and add steel planks to create an external platform to work on.

​

thickness 5mm

Comply to Australian Standard AS1576

Size:width 510mm

Weight:6.1Kg

Description:Two board hopup is used when you wish to have a platform that steps out two planks width out from the scaffolding bay. 
Two hopups are connected to opposing standards in one scaffolding bay, and are used with tie bars ad steel planks to create an external 
platform to work on.

thickness 5mm,  Galvanized

Comply to Australian Strandard AS1576

​

Size:width 740mm

Weight:10.5Kg

Description:Three board hopup is used when you wish to have a platform that steps out three planks width out from the scaffolding bay. 
Two hopups are connected to opposing standards in one scaffolding bay, and are used with tie bars ad steel planks to create an external 
platform to work on. Spigots allow put standards on top.

thickness 5mm

Comply to Australian Standard AS1576

Size:0.7m-2.4m

Weight:2.0--7.0Kg

Description:Tie bars are used to connect two hopup brackets width ways to provide strength and stability to the hopup platform created. They also lock in the steel plank being used as the external working platform

​

Tie bar 0.7m

Tie bar 1.2m

Tie bar 1.8m

Tie bar 2.4m

Size:650mm hight

Weight:7.5kG

Description:Screw jacks are used as the base for scaffolding bays, in which standards are put on. Which provide stability by adjusting the level of the bay on uneven ground.
650mm hight, 500mm adjustable

​

Comply to Australian Standard AS1576

Size:650mm hight

Weight:7.2kg

Description:Swivel jacks are used as the base for scaffolding bays, in which standards are put on slope ground.Which provide stability by adjusting the level of the bay on uneven ground.

650mm hight, 500mm adjustable

​

​Comply to Australian Standard AS1576